Fluffer the Fox Wereable

[[File:|150px]]
Name	Fluffer Wereable
Store Page	Link
Release Date

The Fluffer Wereable is a wearable version of the Fluffer the Fox insertable, both by Primal Hardwere. This model features a classic canine design with a scooped tip that leads into a slightly tapered, straight shaft. The shaft tapers into a 2-lobed knot with a short segment of shaft below it. The shaft connects to a minimal base with an attachment ring and an internal channel for wearing and stabilizing the model during use. The internal channel is textured to stimulate the wearer. A cross sectional view is available on the store page.

Primal Hardwere notes that the internal diameter of this model is narrower than their other Wereables. They suggest this model for users under 1.25 inches or 3.20 centimeters in diameter.

Sizing and Dimensions

The Fluffer wereable is available in one size. Original measurements are given in inches with fractions as well as centimeters. The fractions have been converted into decimal in the chart below. Internal Circumference was not provided and was calculated from the Internal Diameter. Multiple internal length options are available. They are listed in the Internal Lengths table below with the smallest option at the top and the largest at the bottom.

WARNING! All sizing data is for reference only! Consult the maker's page for up to date dimensions. Missing data may have been calculated from existing data, and may be incorrect!

Sizes (Inches)

Dimensions	One Size
Inner Diameter	0.88
Tip Diameter	1.44
Upper Shaft Diameter	1.69
Knot Diameter	2.56
Lower Shaft Diameter	1.69
Inner Circumference	2.76
Tip Circumference	4.75
Upper Shaft Circumference	5.50
Knot Circumference	7.50
Lower Shaft Circumference	5.50
Upper Shaft Length	4.31
Lower Shaft Length	1.00
Usable Length	6.50
Total Length	7.88

Note: Maker provided metrics as fractions.

Sizes (Centimeters)

Dimensions	One Size
Inner Diameter	2.20
Tip Diameter	3.70
Upper Shaft Diameter	4.30
Knot Diameter	6.50
Lower Shaft Diameter	4.30
Inner Circumference	6.91
Tip Circumference	12.00
Upper Shaft Circumference	14.00
Knot Circumference	19.00
Lower Shaft Circumference	14.00
Upper Shaft Length	11.00
Lower Shaft Length	2.50
Usable Length	16.50
Total Length	20.00

Internal Length

Inches	Centimeters
4.00	10.20
5.00	12.70
6.00	15.20

Information

Color Options

Primal Hardwere offers separate color selectors for the shaft and base of this model, as well as metallic and glow in the dark additive options. A variety of set color options are available as well as a custom color option and an "anything goes" option for a random color. Primal Hardwere states that instructions for the custom options, as well as how the metallic and or glow in the dark pigments should be applied in the order notes section. Primal Hardwere warns that they may not honor all custom instructions.

Firmness and Features

Primal Hardwere casts its wereables in the Shore 00-31 - 00-34 firmness range.

Primal Hardwere offers the option to add an open tip to this model, allowing for fluids to flow out of the wereable.

Primal Hardwere offers the option to add a strap on harness at a discount when ordering this model.

Primal Hardwere offers the option to add an insert to the order and allows for the selection of different lengths to match the offered internal length options. The table below shows the available insert options as listed on the store page for this model.

Insert Length

Inches	Centimeters
4.00	10.20
5.00	12.70
6.00	15.20