Growler the Werewolf Wereable
| [[File:|150px]] | |
|---|---|
| Name | Growler Wereable |
| Store Page | Link |
| Release Date | |
The Growler Wereable is a wearable version of the Growler the Werewolf insertable, both by Primal Hardwere. This model features a classic canine design with a scooped, sloped tip that leads into a straight shaft. The shaft widens and then narrows before turning into a 2-lobed knot. A short length of shaft below the knot connects to a minimal base with an attachment ring and an internal channel for wearing and stabilizing the model during use. The internal channel is textured to stimulate the wearer. A cross sectional view is available on the store page.
Sizing and Dimensions
The Growler wereable is available in one size. Original measurements are given in inches with fractions as well as centimeters. The fractions have been converted into decimal in the chart below. Internal Circumference was not provided and was calculated from the Internal Diameter. Multiple internal length options are available. They are listed in the Internal Lengths table below with the smallest option at the top and the largest at the bottom.
| Dimensions | One Size |
|---|---|
| Internal Diameter | 1.25 |
| Upper Shaft Diameter | 2.31 |
| Knot Diameter | 3.00 |
| Lower Shaft Diameter | 1.94 |
| Inner Circumference | 3.93 |
| Upper Shaft Circumference | 6.94 |
| Knot Circumference | 9.06 |
| Lower Shaft Circumference | 6.31 |
| Upper Shaft Length | 5.13 |
| Lower Shaft Length | 1.19 |
| Usable Length | 8.06 |
| Total Length | 8.69 |
| Dimensions | One Size |
|---|---|
| Internal Diameter | 3.20 |
| Upper Shaft Diameter | 5.80 |
| Knot Diameter | 7.70 |
| Lower Shaft Diameter | 5.00 |
| Inner Circumference | 10.05 |
| Upper Shaft Circumference | 17.60 |
| Knot Circumference | 23.00 |
| Lower Shaft Circumference | 16.00 |
| Upper Shaft Length | 13.00 |
| Lower Shaft Length | 3.00 |
| Usable Length | 20.50 |
| Total Length | 22.00 |
| Inches | Centimeters |
|---|---|
| 5.00 | 12.70 |
| 6.00 | 15.20 |
| 7.00 | 17.80 |
Information
Color Options
Primal Hardwere offers separate color selectors for the shaft and base of this model, as well as metallic and glow in the dark additive options. A variety of set color options are available as well as a custom color option and an "anything goes" option for a random color. Primal Hardwere states that instructions for the custom options, as well as how the metallic and or glow in the dark pigments should be applied in the order notes section. Primal Hardwere warns that they may not honor all custom instructions.
Firmness and Features
Primal Hardwere casts its wereables in the Shore 00-31 - 00-34 firmness range.
Primal Hardwere offers the option to add an open tip to this model, allowing for fluids to flow out of the wereable.
Primal Hardwere offers the option to add a strap on harness at a discount when ordering this model.
Primal Hardwere offers the option to add an insert to the order and allows for the selection of different lengths to match the offered internal length options. The table below shows the available insert options as listed on the store page for this model.
| Inches | Centimeters |
|---|---|
| 5.00 | 12.70 |
| 6.00 | 15.20 |
| 7.00 | 17.80 |